Two moles of an ideal gas are heated at constant pressure from $T = 27$°C to $T = 107$°C. Draw a $pV$-diagram for this process.

Two moles of an ideal gas are heated at constant pressure from $T=27$°C to $T=107$°C. Calculate the work done by the gas.

Six moles of an ideal gas are in a cylinder fitted at one end with a movable piston. The initial temperature of the gas is $27.0$°C and the pressure is constant. As part of a machine design project, calculate the final temperature of the gas after it has done $2.40\times {10}^3$ J of work.

The graph in Fig. E$19.4$ shows a $pV$-diagram of the air in a human lung when a person is inhaling and then exhaling a deep breath. Such graphs, obtained in clinical practice, are normally somewhat curved, but we have modeled one as a set of straight lines of the same general shape. (Important: The pressure shown is the gauge pressure, not the absolute pressure.) How many joules of net work does this person's lung do during one complete breath?

The graph in Fig. E$19.4$ shows a $pV$-diagram of the air in a human lung when a person is inhaling and then exhaling a deep breath. Such graphs, obtained in clinical practice, are normally somewhat curved, but we have modeled one as a set of straight lines of the same general shape. (Important: The pressure shown is the gauge pressure, not the absolute pressure.) The process illustrated here is somewhat different from those we have been studying, because the pressure change is due to changes in the amount of gas in the lung, not to temperature changes. (Think of your own breathing. Your lungs do not expand because they've gotten hot.) If the temperature of the air in the lung remains a reasonable $20$°C, what is the maximum number of moles in this person's lung during a breath?

A gas undergoes two processes. In the first, the volume remains constant at $0.200$ m³ and the pressure increases from $2.00\times10^5$ Pa to $5.00\times10^5$ Pa. The second process is a compression to a volume of $0.120$ m³ at a constant pressure of $5.00\times10^5$ Pa. In a $pV$-diagram, show both processes.

A gas undergoes two processes. In the first, the volume remains constant at $0.200$ m³ and the pressure increases from $2.00\times {10}^5$ Pa to $5.00\times {10}^5$ Pa. The second process is a compression to a volume of $0.120$ m³ at a constant pressure of $5.00\times {10}^5$ Pa. Find the total work done by the gas during both processes.

In Fig. $19.7$a, consider the closed loop $1\to 3\to 2\to 4\to 1$. This is a cyclic process in which the initial and final states are the same. Find the total work done by the system in this cyclic process, and show that it is equal to the area enclosed by the loop.

Figure E$19.8$ shows a $pV$-diagram for an ideal gas in which its absolute temperature at $b$ is one-fourth of its absolute temperature at $a$. Did heat enter or leave the gas from $a$ to $b$? How do you know?

A gas in a cylinder expands from a volume of $0.110$ m³ to $0.320$ m³ . Heat flows into the gas just rapidly enough to keep the pressure constant at $1.65\times {10}^5$ Pa during the expansion. The total heat added is $1.15\times {10}^5$ J. Find the work done by the gas.

Five moles of an ideal monatomic gas with an initial temperature of $127$°C expand and, in the process, absorb $1500$ J of heat and do $2100$ J of work. What is the final temperature of the gas?

The process $abc$ shown in the $pV$-diagram in Fig. E$19.11$ involves $0.0175$ mol of an ideal gas. What was the lowest temperature the gas reached in this process? Where did it occur?

A gas in a cylinder is held at a constant pressure of $1.80\times {10}^5$ Pa and is cooled and compressed from $1.70$ m³ to $1.20$ m³. The internal energy of the gas decreases by $1.40\times {10}^5$ J. Does it matter whether the gas is ideal? Why or why not?

The $pV$-diagram in Fig. E$19.13$ shows a process $abc$ involving $0.450$ mol of an ideal gas. How much heat had to be added during the process to increase the internal energy of the gas by $15,000$ J?

When water is boiled at a pressure of $2.00$ atm, the heat of vaporization is $2.20\times {10}^6$ J/kg and the boiling point is $120$°C. At this pressure, $1.00$ kg of water has a volume of $1.00\times {10}^{-3}$ m³, and $1.00$ kg of steam has a volume of $0.824$ m³. Compute the work done when $1.00$ kg of steam is formed at this temperature.

When water is boiled at a pressure of $2.00$ atm, the heat of vaporization is $2.20\times10^6$ J/kg and the boiling point is $120$°C. At this pressure, $1.00$ kg of water has a volume of $1.00\times10^{-3}$ m³, and $1.00$ kg of steam has a volume of $0.824$ m³. Compute the increase in internal energy of the water.

An ideal gas is taken from $a$ to $b$ on the $pV$-diagram shown in Fig. E$19.15$. During this process, $700$ J of heat is added and the pressure doubles. How does the internal energy of the gas at $a$ compare to the internal energy at $b$? Be specific and explain.

During an isothermal compression of an ideal gas, $410$ J of heat must be removed from the gas to maintain constant temperature. How much work is done by the gas during the process?

A cylinder contains $0.0100$ mol of helium at $T=27.0$°C. How much heat is needed to raise the temperature to $67.0$°C while keeping the volume constant? Draw a $pV$-diagram for this process.

A cylinder contains $0.0100$ mol of helium at $T = 27.0$°C. If instead the pressure of the helium is kept constant, how much heat is needed to raise the temperature from $27.0$°C to $67.0$°C? Draw a $pV$-diagram for this process.

A cylinder contains $0.0100$ mol of helium at $T = 27.0$°C. What accounts for the difference between your answers to parts (a) and (b)? In which case is more heat required? What becomes of the additional heat?

(a) How much heat is needed to raise the temperature to $67.0$°C while keeping the volume constant? Draw a $pV$-diagram for this process.

(b) If instead the pressure of the helium is kept constant, how much heat is needed to raise the temperature from $27.0$°C to $67.0$°C? Draw a $pV$-diagram for this process.

A cylinder contains $0.0100$ mol of helium at $T = 27.0$°C. If the gas is ideal, what is the change in its internal energy in part (a)? In part (b)? How do the two answers compare? Why?

(a) How much heat is needed to raise the temperature to $67.0$°C while keeping the volume constant? Draw a $pV$-diagram for this process.

(b) If instead the pressure of the helium is kept constant, how much heat is needed to raise the temperature from $27.0$°C to $67.0$°C? Draw a $pV$-diagram for this process.

Heat $Q$ flows into a monatomic ideal gas, and the volume increases while the pressure is kept constant. What fraction of the heat energy is used to do the expansion work of the gas?

An experimenter adds $970$ J of heat to $1.75$ mol of an ideal gas to heat it from $10.0$°C to $25.0$°C at constant pressure. The gas does $+223$ J of work during the expansion. Calculate $\gamma$ for the gas.

Propane gas (C₃H₈) behaves like an ideal gas with $g=1.127$. Determine the molar heat capacity at constant volume and the molar heat capacity at constant pressure.

The temperature of $0.150$ mol of an ideal gas is held constant at $77.0$°C while its volume is reduced to $25.0\%$ of its initial volume. The initial pressure of the gas is $1.25$ atm. Does the gas exchange heat with its surroundings? If so, how much? Does the gas absorb or liberate heat?

Five moles of monatomic ideal gas have initial pressure $2.50\times {10}^3$ Pa and initial volume $2.10$ m³. While undergoing an adiabatic expansion, the gas does $1480$ J of work. What is the final pressure of the gas after the expansion?

A monatomic ideal gas that is initially at $1.50\times {10}^5$ Pa and has a volume of $0.0800$ m³ is compressed adiabatically to a volume of $0.0400$ m³. What is the final pressure?

A monatomic ideal gas that is initially at $1.50\times10^5$ Pa and has a volume of $0.0800$ m³ is compressed adiabatically to a volume of $0.0400$ m³. What is the ratio of the final temperature of the gas to its initial temperature? Is the gas heated or cooled by this compression?

The engine of a Ferrari F355 F1 sports car takes in air at $20.0$°C and $1.00$ atm and compresses it adiabatically to $0.0900$ times the original volume. The air may be treated as an ideal gas with $g=1.40$. Find the final temperature and pressure.