8051 Microcontroller and Embedded Systems, The, Pearson New International Edition, 2nd edition

Published by Pearson (August 5, 2013) © 2014
  • Muhammad Ali Mazidi
  • Janice G. Mazidi
  • Rolin D. McKinlay

Title overview

  • A new chapter on 8051 C programming (Chapter 7)
  • A new section on the 8051 C programming of timers (Section 9.3)
  • A new section on the second serial port of the DS89C4x0 chip (Section 10.4)
  • A new section on the 8051 C programming of the second serial port (Section 10.5)
  • A new section on the 8051 C programming of interrupts (Section 11.6)
  • Programming of the 1KB SRAM of the DS89C4x0 chip (Section 14.4)
  • A new section on the 8051 C programming of external memory (Section 14.5)
  • A new chapter on the DS12887 RTC (real-time clock) chip (Chapter 16)
  • A new chapter on motors, relays, and optoisolators (Chapter 17)
  • Appendix A describes each 8051 instruction in detail, with examples. Appendix A also provides the clock count for instructions, 8051 register diagrams, and RAM memory maps.
  • Appendix B describes basics of wire wrapping.
  • Appendix C covers IC technology and logic families, as well as 8051 I/O port interfacing and fan-out. Make sure you study this before connecting the 8051 to an external device.
  • Appendix D, the use of flowcharts and psuedocode is explored.
  • Appendix E is for students familiar with x86 architecture who need to make a rapid transition to 8051 architecture.
  • Appendix F provides the table of ASCII characters.
  • Appendix G lists resources for assembler shareware, and electronics parts.
  • Appendix H contains data sheets for the 8051 and other IC chips.

New Features:

• A new chapter on 8051 C programming (Chapter 7)

• A new section on the 8051 C programming of timers (Section 9.3)

• A new section on the second serial port of the DS89C4x0 chip (Section 10.4)

• A new section on the 8051 C programming of the second serial port (Section 10.5)

• A new section on the 8051 C programming of interrupts (Section 11.6)

• Programming of the 1KB SRAM of the DS89C4x0 chip (Section 14.4)

• A new section on the 8051 C programming of external memory (Section 14.5)

• A new chapter on the DS12887 RTC (real-time clock) chip (Chapter 16)

• A new chapter on motors, relays, and optoisolators (Chapter 17)

Table of contents

CHAPTER 0: INTRODUCTION TO COMPUTING 1

Section 0.1: Numbering and coding systems 2

Section 0.2: Digital primer 9

Section 0.3: Inside the computer 13

CHAPTER 1: THE 8051 MICROCONTROLLERS 23

Section 1.1: Microcontrollers and embedded processors 24

Section 1.2: Overview of the 8051 family 28

CHAPTER 2: 8051 ASSEMBLY LANGUAGE PROGRAMMING 37

Section 2.1: Inside the 8051 38

Section 2.2: Introduction to 8051 Assembly programming 41

Section 2.3: Assembling and running an 8051 program 44

Section 2.4: The program counter and ROM space in the 8051 46

Section 2.5: 8051 data types and directives 49

Section 2.6: 8051 flag bits and the PSW register 52

Section 2.7: 8051 register banks and stack 55

CHAPTER 3: JUMP, LOOP, AND CALL INSTRUCTIONS 69

Section 3.1: Loop and jump instructions 70

Section 3.2: Call instructions 75

Section 3.3: Time delay for various 8051 chips 80

CHAPTER 4: I/OPORT PROGRAMMING 93

Section 4.1: 8051 I/O programming 94

Section 4.2: I/O bit manipulation programming 100

CHAPTER 5: 8051 ADDRESSING MODES 109

Section 5.1: Immediate and register addressing modes 110

Section 5.2: Accessing memory using various addressing modes 112

Section 5.3: Bit addresses for I/O and RAM 122

Section 5.4: Extra 128-byte on-chip RAM in 8052 131

CHAPTER 6: ARITHMETIC & LOGIC INSTRUCTIONS

AND PROGRAMS 139

Section 6.1: Arithmetic instructions 140

Section 6.2: Signed number concepts and arithmetic operations 150

Section 6.3: Logic and compare instructions 155

Section 6.4: Rotate instruction and data serialization 161

Section 6.5: BCD, ASCII, and other application programs 167

CHAPTER 7: 8051 PROGRAMMING IN C 181

Section 7.1: Data types and time delay in 8051 C 182

Section 7.2: I/O programming in 8051 C 188

Section 7.3: Logic operations in 8051 C 194

Section 7.4: Data conversion programs in 8051 C 199

Section 7.5: Accessing code ROM space in 8051 C 204

Section 7.6: Data serialization using 8051 C 209

CHAPTER 8: 8051 HARDWARE CONNECTION AND

INTEL HEX FILE 217

Section 8.1: Pin description of the 8051 218

Section 8.2: Design and test of DS89C4x0 trainer 224

Section 8.3: Explaining the Intel hex file 232

CHAPTER 9: 8051 TIMER PROGRAMMING

IN ASSEMBLY AND C 239

Section 9.1: Programming 8051 timers 240

Section 9.2: Counter programming 255

Section 9.3: Programming timers 0 and 1 in 8051 C 260

CHAPTER 10: 8051 SERIAL PORT PROGRAMMING

IN ASSEMBLY AND C 277

Section 10.1: Basics of serial communication 278

Section 10.2: 8051 connection to RS232 285

Section 10.3: 8051 serial port programming in Assembly 287

Section 10.4: Programming the second serial port 300

Section 10.5: Serial port programming in C 306

CHAPTER 11: INTERRUPTS PROGRAMMING

IN ASSEMBLY AND C 317

Section 11.1: 8051 interrupts 318

Section 11.2: Programming timer interrupts 322

Section 11.3: Programming external hardware interrupts 326

Section 11.4: Programming the serial communication interrupt 333

Section 11.5: Interrupt priority in the 8051/52 337

Section 11.6: Interrupt programming in C 340

CHAPTER 12: LCD AND KEYBOARD INTERFACING 351

Section 12.1: LCD interfacing 352

Section 12.2: Keyboard interfacing 363

CHAPTER 13: ADC, DAC, AND SENSOR INTERFACING 373

Section 13.1: Parallel and serial ADC 374

Section 13.2: DAC interfacing 398

Section 13.3: Sensor interfacing and signal conditioning 403

CHAPTER 14: 8051 INTERFACING TO EXTERNAL MEMORY 411

Section 14.1: Semiconductor memory 412

Section 14.2:

Loading...Loading...Loading...