BackAn LC circuit with an inductor of 0.05 H and a capacitor of 35 μF begins with the current of -1A. The capacitor plates have a maximum charge of 2.65mC at any time during the oscillation. What is the phase angle of this oscillation?
In an oscillating LC circuit in which the capacitance C = 4μF and the maximum voltage across the capacitor V = 1.50V, the maximum current measured across the inductor is 50mA. What is the angular frequency of this LC circuit?
A 2.0 mH inductor is connected in parallel with a variable capacitor. The capacitor can be varied from 100 pF to 200 pF. What is the range of oscillation frequencies for this circuit?
An LC circuit is built with a 20 mH inductor and an 8.0 pF capacitor. The capacitor voltage has its maximum value of 25 V at t = 0 s. What is the inductor current at that time?
In recent years it has been possible to buy a 1.0 F capacitor. This is an enormously large amount of capacitance. Suppose you want to build a 1.0 Hz oscillator with a 1.0 F capacitor. You have a spool of 0.25-mm-diameter wire and a 4.0-cm-diameter plastic cylinder. How long must your inductor be if you wrap it with 2 layers of closely spaced turns?
BIO An MRI machine needs to detect signals that oscillate at very high frequencies. It does so with an LC circuit containing a 15 mH coil. To what value should the capacitance be set to detect a 450 MHz signal?
An electric oscillator is made with a 0.10 μF capacitor and a 1.0 mH inductor. The capacitor is initially charged to 5.0 V. What is the maximum current through the inductor as the circuit oscillates?
How much resistance must be added to a pure LC circuit (L = 350 mH, C = 1600 pF) to change the oscillator’s frequency by 0.25%? Will it be increased or decreased?
A certain FM radio tuning circuit has a fixed capacitor C = 680 pF. Tuning is done by a variable inductance. What range of values must the inductance have to tune stations from 88 MHz to 108 MHz?
(II) A 475-pF capacitor is charged to 135 V and then quickly connected to a 175-mH inductor. Determine (a) the frequency of oscillation, (b) the peak value of the current, and (c) the maximum energy stored in the magnetic field of the inductor.