Atomic masses of elements can be found by simply looking at the periodic table. So let's start off by looking at the symbol of H, which represents hydrogen. And if you take a look at hydrogen as well as the other elements on the periodic table, you'll see these whole numbers. These whole numbers represent our atomic number. They are the number of protons. When we say atomic mass though, the atomic mass is the number that is seldom a whole number. This is our atomic mass. So you can find the atomic mass of any element on the periodic table just by simply looking it up. Now we're going to say the atomic mass itself is an average of all its isotopes that use the units of grams per mole, AMU, or Daltons, and we're going to say remember that 1 AMU equals 1.66 × 10 - 27 kilograms. So just remember, these atomic masses that you see on the periodic table, they are usually not whole numbers. You'd have to get way down below here to these heavy elements down here till you see whole numbers for atomic masses. And remember, they are the average of all the isotopes for that given element.

- 1. Matter and Measurements4h 29m
- What is Chemistry?5m
- The Scientific Method9m
- Classification of Matter16m
- States of Matter8m
- Physical & Chemical Changes19m
- Chemical Properties8m
- Physical Properties5m
- Intensive vs. Extensive Properties13m
- Temperature (Simplified)9m
- Scientific Notation13m
- SI Units (Simplified)5m
- Metric Prefixes24m
- Significant Figures (Simplified)11m
- Significant Figures: Precision in Measurements7m
- Significant Figures: In Calculations19m
- Conversion Factors (Simplified)15m
- Dimensional Analysis22m
- Density12m
- Specific Gravity9m
- Density of Geometric Objects19m
- Density of Non-Geometric Objects9m

- 2. Atoms and the Periodic Table5h 23m
- The Atom (Simplified)9m
- Subatomic Particles (Simplified)12m
- Isotopes17m
- Ions (Simplified)22m
- Atomic Mass (Simplified)17m
- Atomic Mass (Conceptual)12m
- Periodic Table: Element Symbols6m
- Periodic Table: Classifications11m
- Periodic Table: Group Names8m
- Periodic Table: Representative Elements & Transition Metals7m
- Periodic Table: Elemental Forms (Simplified)6m
- Periodic Table: Phases (Simplified)8m
- Law of Definite Proportions9m
- Atomic Theory9m
- Rutherford Gold Foil Experiment9m
- Wavelength and Frequency (Simplified)5m
- Electromagnetic Spectrum (Simplified)11m
- Bohr Model (Simplified)9m
- Emission Spectrum (Simplified)3m
- Electronic Structure4m
- Electronic Structure: Shells5m
- Electronic Structure: Subshells4m
- Electronic Structure: Orbitals11m
- Electronic Structure: Electron Spin3m
- Electronic Structure: Number of Electrons4m
- The Electron Configuration (Simplified)22m
- Electron Arrangements5m
- The Electron Configuration: Condensed4m
- The Electron Configuration: Exceptions (Simplified)12m
- Ions and the Octet Rule9m
- Ions and the Octet Rule (Simplified)8m
- Valence Electrons of Elements (Simplified)5m
- Lewis Dot Symbols (Simplified)7m
- Periodic Trend: Metallic Character4m
- Periodic Trend: Atomic Radius (Simplified)7m

- 3. Ionic Compounds2h 18m
- Periodic Table: Main Group Element Charges12m
- Periodic Table: Transition Metal Charges6m
- Periodic Trend: Ionic Radius (Simplified)5m
- Periodic Trend: Ranking Ionic Radii8m
- Periodic Trend: Ionization Energy (Simplified)9m
- Periodic Trend: Electron Affinity (Simplified)8m
- Ionic Bonding6m
- Naming Monoatomic Cations6m
- Naming Monoatomic Anions5m
- Polyatomic Ions25m
- Naming Ionic Compounds11m
- Writing Formula Units of Ionic Compounds7m
- Naming Ionic Hydrates6m
- Naming Acids18m

- 4. Molecular Compounds2h 18m
- Covalent Bonds6m
- Naming Binary Molecular Compounds6m
- Molecular Models4m
- Bonding Preferences6m
- Lewis Dot Structures: Neutral Compounds (Simplified)8m
- Multiple Bonds4m
- Multiple Bonds (Simplified)6m
- Lewis Dot Structures: Multiple Bonds10m
- Lewis Dot Structures: Ions (Simplified)8m
- Lewis Dot Structures: Exceptions (Simplified)12m
- Resonance Structures (Simplified)5m
- Valence Shell Electron Pair Repulsion Theory (Simplified)4m
- Electron Geometry (Simplified)8m
- Molecular Geometry (Simplified)11m
- Bond Angles (Simplified)11m
- Dipole Moment (Simplified)15m
- Molecular Polarity (Simplified)7m

- 5. Classification & Balancing of Chemical Reactions3h 17m
- Chemical Reaction: Chemical Change5m
- Law of Conservation of Mass5m
- Balancing Chemical Equations (Simplified)13m
- Solubility Rules16m
- Molecular Equations18m
- Types of Chemical Reactions12m
- Complete Ionic Equations18m
- Calculate Oxidation Numbers15m
- Redox Reactions17m
- Spontaneous Redox Reactions8m
- Balancing Redox Reactions: Acidic Solutions17m
- Balancing Redox Reactions: Basic Solutions17m
- Balancing Redox Reactions (Simplified)13m
- Galvanic Cell (Simplified)16m

- 6. Chemical Reactions & Quantities2h 35m
- 7. Energy, Rate and Equilibrium3h 46m
- Nature of Energy6m
- First Law of Thermodynamics7m
- Endothermic & Exothermic Reactions7m
- Bond Energy14m
- Thermochemical Equations12m
- Heat Capacity19m
- Thermal Equilibrium (Simplified)8m
- Hess's Law23m
- Rate of Reaction11m
- Energy Diagrams12m
- Chemical Equilibrium7m
- The Equilibrium Constant14m
- Le Chatelier's Principle23m
- Solubility Product Constant (Ksp)17m
- Spontaneous Reaction10m
- Entropy (Simplified)9m
- Gibbs Free Energy (Simplified)18m

- 8. Gases, Liquids and Solids3h 25m
- Pressure Units6m
- Kinetic Molecular Theory14m
- The Ideal Gas Law18m
- The Ideal Gas Law Derivations13m
- The Ideal Gas Law Applications6m
- Chemistry Gas Laws16m
- Chemistry Gas Laws: Combined Gas Law12m
- Standard Temperature and Pressure14m
- Dalton's Law: Partial Pressure (Simplified)13m
- Gas Stoichiometry18m
- Intermolecular Forces (Simplified)19m
- Intermolecular Forces and Physical Properties11m
- Atomic, Ionic and Molecular Solids10m
- Heating and Cooling Curves30m

- 9. Solutions4h 10m
- Solutions6m
- Solubility and Intermolecular Forces18m
- Solutions: Mass Percent6m
- Percent Concentrations10m
- Molarity18m
- Osmolarity15m
- Parts per Million (ppm)13m
- Solubility: Temperature Effect8m
- Intro to Henry's Law4m
- Henry's Law Calculations12m
- Dilutions12m
- Solution Stoichiometry14m
- Electrolytes (Simplified)13m
- Equivalents11m
- Molality15m
- The Colligative Properties15m
- Boiling Point Elevation16m
- Freezing Point Depression9m
- Osmosis16m
- Osmotic Pressure9m

- 10. Acids and Bases3h 29m
- Acid-Base Introduction11m
- Arrhenius Acid and Base6m
- Bronsted Lowry Acid and Base18m
- Acid and Base Strength17m
- Ka and Kb12m
- The pH Scale19m
- Auto-Ionization9m
- pH of Strong Acids and Bases9m
- Acid-Base Equivalents14m
- Acid-Base Reactions7m
- Gas Evolution Equations (Simplified)6m
- Ionic Salts (Simplified)23m
- Buffers25m
- Henderson-Hasselbalch Equation16m
- Strong Acid Strong Base Titrations (Simplified)10m

- 11. Nuclear Chemistry56m
- BONUS: Lab Techniques and Procedures1h 38m
- BONUS: Mathematical Operations and Functions47m
- 12. Introduction to Organic Chemistry1h 34m
- 13. Alkenes, Alkynes, and Aromatic Compounds2h 12m
- 14. Compounds with Oxygen or Sulfur1h 6m
- 15. Aldehydes and Ketones1h 1m
- 16. Carboxylic Acids and Their Derivatives1h 11m
- 17. Amines38m
- 18. Amino Acids and Proteins1h 51m
- 19. Enzymes1h 37m
- 20. Carbohydrates1h 46m
- Intro to Carbohydrates4m
- Classification of Carbohydrates4m
- Fischer Projections4m
- Enantiomers vs Diastereomers8m
- D vs L Enantiomers8m
- Cyclic Hemiacetals8m
- Intro to Haworth Projections4m
- Cyclic Structures of Monosaccharides11m
- Mutarotation4m
- Reduction of Monosaccharides10m
- Oxidation of Monosaccharides7m
- Glycosidic Linkage14m
- Disaccharides7m
- Polysaccharides7m

- 21. The Generation of Biochemical Energy2h 8m
- 22. Carbohydrate Metabolism2h 22m
- 23. Lipids2h 26m
- Intro to Lipids6m
- Fatty Acids25m
- Physical Properties of Fatty Acids6m
- Waxes4m
- Triacylglycerols12m
- Triacylglycerol Reactions: Hydrogenation8m
- Triacylglycerol Reactions: Hydrolysis13m
- Triacylglycerol Reactions: Oxidation7m
- Glycerophospholipids15m
- Sphingomyelins13m
- Steroids15m
- Cell Membranes7m
- Membrane Transport10m

- 24. Lipid Metabolism1h 45m
- 25. Protein and Amino Acid Metabolism1h 37m
- 26. Nucleic Acids and Protein Synthesis2h 54m
- Intro to Nucleic Acids4m
- Nitrogenous Bases16m
- Nucleoside and Nucleotide Formation9m
- Naming Nucleosides and Nucleotides13m
- Phosphodiester Bond Formation7m
- Primary Structure of Nucleic Acids11m
- Base Pairing10m
- DNA Double Helix6m
- Intro to DNA Replication20m
- Steps of DNA Replication11m
- Types of RNA10m
- Overview of Protein Synthesis4m
- Transcription: mRNA Synthesis9m
- Processing of pre-mRNA5m
- The Genetic Code6m
- Introduction to Translation7m
- Translation: Protein Synthesis18m

# Atomic Mass (Simplified) - Online Tutor, Practice Problems & Exam Prep

Atomic masses of elements, found on the periodic table, represent averages of all isotopes and are typically not whole numbers. The atomic mass can be calculated using isotopic masses and percent abundances, where percent abundance is converted to fractional abundance by dividing by 100. The formula for atomic mass is: $=\mathrm{isotopic\; mass}\left(1\right)\mathrm{isotopic\; abundance}\left(1\right)+\mathrm{isotopic\; mass}\left(2\right)\mathrm{isotopic\; abundance}\left(2\right)$. This process is essential for understanding elements like manganese with multiple isotopes.

The atomic mass of an element can be found on the Periodic Table.

## Determining Atomic Mass

### Atomic Mass (Conceptual) Concept 1

#### Video transcript

### Atomic Mass (Conceptual) Example 1

#### Video transcript

So here for this example question, it says, which of the following represents an element from the first column with the greatest atomic mass? Alright. So our first column, if we look at this periodic table, includes all of these different elements. And remember, the number in red, which is not a whole number normally, that represents the atomic mass of any of these given elements. Now here, if we take a look, we have barium, Ba. Again, later we'll learn about how the names are attached to the element symbol. Ba is not in the 1st column; here it's in the 2nd column. So this cannot be a choice. Then we're going to say next that we have Al. Al stands for aluminum. Aluminum is over here in the 3rd column, well, all the way over here in this 13th column, actually. So, this is out. Next, we have Cs, which is cesium. Here it is right here. It's in the first column. It's pretty low down there. It's 132.91 for its atomic mass. Remember, that could be in grams per mole, atomic mass units, or Daltons. So far, it looks like it's the highest one. The only one higher than that would be Fr. Notice that in the bottom rows here, most of them are whole numbers. These are super large mass elements that are pretty unstable. They typically don't have numerous isotopes. As a result, they have no decimal places. So, so far C looks like it's our best choice. If we look at D, we have Li, which is up here, not higher in mass, not greater in atomic mass. And then we have Na, which is right here. So it looks like C is our best choice. It has the greatest mass, atomic mass, from column 1 from the choices provided. So just remember we have our element symbols, we have our atomic masses, which normally are not whole numbers, and then we actually have whole numbers. Those represent our atomic numbers.

On the Periodic Table, the atomic mass is represented by the number with decimal places.

Which of the following choices has the greatest atomic mass?

^{24}amu)

^{26}Da)

### Atomic Mass (Simplified) Concept 2

#### Video transcript

Now the atomic mass of an element can be calculated if you know the isotopic masses and percent abundances. Isotopic masses are the masses for all the isotopes of a given element. And percent abundance, sometimes referred to as natural abundances, are the percentages available for each of the isotopes of a given element. Sometimes they're referred to as percent natural abundances. I know it's a little bit redundant, but just remember, you might see percent abundances, natural abundances, or percent natural abundances.

Isotopic abundance, also called fractional abundance, is the percent abundance of an isotope divided by 100. Remember, when you divide a percentage by 100, you're changing it from its percentage form to its fractional or decimal form. All of this together gives us our atomic mass formula.

The atomic mass formula, we are going to say, equals the isotopic mass of isotope 1 times its isotopic abundance plus the isotopic mass of isotope 2 times its isotopic abundance. Of course, if you have more than 2 isotopes for a given element, this would just continue. You would keep adding, let's say, plus isotope mass 3 times its isotopic abundance plus isotope mass 4 times its isotopic abundance. In this example, we're just showing that this particular element we're talking about has 2 isotopes involved with it, and they both have their own masses. But again, this formula can be expanded to even more isotopes depending on the element. Elements such as manganese have various isotopes, so their formulas would be a lot larger.

In MathML format, the atomic mass formula can be presented as follows:

Atomic Mass = ∑in m i f iWhere mi is the isotopic mass and fi is the fractional abundance of isotope i.

### Atomic Mass (Simplified) Example 2

#### Video transcript

In the following example question, it says, calculate the atomic mass of gallium if gallium has 2 naturally occurring isotopes with the following masses and natural abundances. So here we're dealing with gallium-69 and gallium-71. Their atomic masses are written in terms of atomic mass units, and then here we have 60.11% and 39.89%. Those represent the percent abundances. Now, to find the atomic mass of our gallium element, let's follow step 1. Step 1 says if you are given percent abundances, which we were, we're going to divide them by 100 in order to isolate our fractional abundances. So divide them both by a 100, when we do that we're going to get our fractional abundances.

Step 2, plug your given variables into the atomic mass formula in order to isolate the missing variable. So this is just a simple plug and chug algebraic type of situation. Our atomic mass of our element equals the mass of the first isotope times its fractional abundance plus the mass of our second isotope times its fractional abundance. So when we do that, we're going to get:

x = ( 69.7230 0.6011 + 71.0 0.3989 ) amuSince our isotopic masses have 4 decimal places, we could follow 4 decimal places here, but we have multiple choice options and we're going to go with the best answer, which would be option a for this particular question. So using the atomic mass formula is pretty simple. All we have to do is round up all the variables that you are given and isolate the one that's missing. From there, you can find your final answer.

Only three isotopes of magnesium exist on earth. ^{24}Mg is the most common form at 78.70% natural abundance with a mass of 23.98504 amu, ^{25}Mg has a 10.13% natural abundance, while ^{26}Mg has a natural abundance of 11.17% and a mass of 25.98259 amu. What is the mass of the ^{25}Mg isotope?

Silver has an atomic mass of 107.868 amu. The Ag-109 isotope (108.905 amu) is 48.16%. What is the amu of the other isotope?

## Do you want more practice?

### Here’s what students ask on this topic:

What is atomic mass and how is it different from atomic number?

Atomic mass is the weighted average mass of all the isotopes of an element, measured in atomic mass units (AMU) or Daltons. It is typically not a whole number. Atomic number, on the other hand, is the number of protons in the nucleus of an atom and is always a whole number. The atomic number determines the element's identity, while the atomic mass reflects the average mass of its isotopes.

How do you calculate the atomic mass of an element?

To calculate the atomic mass of an element, you need the isotopic masses and their percent abundances. The formula is:

$\mathrm{Atomic}\mathrm{mass}=(\mathrm{Isotopic}\mathrm{mass}1\times \mathrm{Isotopic}\mathrm{abundance}1)+(\mathrm{Isotopic}\mathrm{mass}2\times \mathrm{Isotopic}\mathrm{abundance}2)$

Convert percent abundances to fractional abundances by dividing by 100. If there are more isotopes, continue adding their contributions.

Why are atomic masses on the periodic table not whole numbers?

Atomic masses on the periodic table are not whole numbers because they represent the weighted average of all the isotopes of an element. Each isotope has a different mass, and the atomic mass takes into account the relative abundance of each isotope. This averaging process results in a value that is seldom a whole number.

What is the significance of isotopic abundance in calculating atomic mass?

Isotopic abundance, also known as percent abundance, indicates the relative amount of each isotope of an element found in nature. It is crucial for calculating atomic mass because the atomic mass is a weighted average of the isotopic masses, with the weights being the isotopic abundances. Without knowing the isotopic abundances, you cannot accurately determine the atomic mass of an element.

How do you convert percent abundance to fractional abundance?

To convert percent abundance to fractional abundance, divide the percent abundance by 100. For example, if an isotope has a percent abundance of 75%, its fractional abundance would be:

$75/100=0.75$

This conversion is necessary for calculating atomic mass using the isotopic masses and their abundances.